Kegel8 Pelvic Toner Comfort Probe
- Medical Grade Pelvic Toner Probe
- Quality TPE plastic with the largest lateral bar electrode area
- Suitable for EMS and biofeedback
- Medical grade stainless steel with less than 8% nickel
Lightweight and easy to use, our latest pelvic toner probe is designed for easy deep insertion for optimum connectivity with the bed of the pelvic floor
It’s neat and, as our most light-weight probe to-date you’re guaranteed comfort.
To use, apply a thin layer of KE Gel lubrication and insert vaginally up to the tip at the base of the probe, with the two metal strips (electrodes) pointing towards your hips.
The Kegel8 Comfort Probe can be used with the whole range of Kegel8 electronic exercisers.
Because we trust the quality of our probes so much we extend the warranty from the standard 60 uses up to 6 months unlimited usage.
Please be aware if you are nickel intolerant we advise the electrode surface be examined before use to ensure the surface has not been scratched during storage. The probe can safely be used for up to 2 years providing all manufacturers recommendations are followed.
This probe is fitted with 2mm female connectors and is compatible with your Kegel8 device via your leadwire.
*To help extend the life of your probe and the lead wires we advise that when unplugging them you pull from the head of the connector and not from the wire (shown above) as this can damage the inside of the wire. The best way to avoid damaging them is to only remove the wires when you are changing probes as there is no reason to any other time.*
|Recommended For||Vaginal use | Pelvic floor weakness | Bladder weakness|
|Can be used with||All Kegel8 Pelvic Toners, NMES Pelvic Toners which use asymmetrical and symmetrical waveform and for Professional Clinical use.|
|Included Contents||Kegel8 Comfort Probe|
|Material||Body-safe Plastic | Stainless Steel | PVC | Latex free|
|Insertable Length||6.4 cm|
|Diameter||1.6 - 3 cm|
|Can Be Used With Biofeedback||Yes|
|Washing Instructions||Clean using Kegel8 Cleaning Spray and pat or air dry. Can be cleaned with warm soapy water (do not sterilise).|
|Electrode Surface Area||830 mmsq (approx.)|
|No. of Electrodes||2|